Features of automatic mask making machine?
Features of automatic cup mask machine:
1. The advanced servo and constant temperature control system adopted is controlled by PLC program to complete the material from entering → forming → welding → punching, and the entire production process is fully automated.
2. The equipment only needs to be equipped with a fully automatic cup mask nose bridge ear strap welding machine, and can produce countless market-selling cup mask products.
3. The products are exquisitely made and the quality completely meets or exceeds the domestic and foreign inspection standards. At the same time, it saves more than 30% of material than previous mask equipment. In this way, cost reduction and efficiency improvement are realized in a real sense.
Folding full N95 mask machine:
Full-automatic production of mask body machine, including feeding, plastic strip aluminum strip insertion / uncovering, scene selection, ultrasonic fusion, slicing and other full-automatic processes, the output is extremely high, which can produce 1-200 pieces per minute. The main power frequency conversion speed regulation, can be fast or slow, using different materials can produce different masks, the product has two or three layers, and the product quality is stable, easy to operate, low noise and small footprint. Applicable material: Spunbond filament non-woven fabric, 16-30 g / m2 Suitable for processing disposable masks.
N95 cup mask machine:
Hot-press molding: the mask material (non-woven fabric) is molded with the form of overheating (cup-shaped). 1. Including automatic material returning action and feeding frame; 2. Forming four masks each time.
Slicing: used to make the outer layer (protective layer) of the cup-shaped mask. The special alloy steel material is used to make the flower wheel. The blade is wear-resistant and has a long service life. Wheel processing, without damaging cloth edges, without preheating when manufacturing without burrs, and continuous operation.
Crimping: Laminate the mask inside and outside
Trimming: Use pneumatic punching to cut off the excess edges of the mask.
Breathing valve welding: welding mask breathing valve
Welding area: 130mm
Speed: 20-30 pieces / min
The integrated structure of the fuselage adopts safety adjustment scale control; the computer is intelligently controlled with an accuracy of up to one-thousandth of a second; the mold level is adjusted automatically. The motor of the fuselage rises and falls automatically, and the base level is adjusted.
Earband spot welding machine: Speed: 8-12 pieces / min can be used for welding flat, inner earband / outer earband, standard mask, duckbill and other special-shaped masks. After the mask body is made, the ear straps are welded manually.