Masks Machine Equipment Environmental Requirementsw
The ambient temperature is required to be between 15 and 35 ℃
The humidity requirement is 40% ～ 80%, no condensation
Power supply requirements: AC220V, 50Hz;
Power supply fluctuation: ± 5%, the power ground wire meets international requirements.
Areas with a voltage amplitude of more than 5% should be equipped with automatic voltage
stabilization and current stabilization devices;
There should be no strong electromagnetic signal interference near the installation equipment,
and avoid radio transmission stations (or relay stations) around the installation site;
Foundation amplitude: less than 50um; Vibration acceleration: less than 0.05g; Avoid having a
lot of machine tools such as punching in the vicinity;
Equipment space requirements to ensure smoke-free and dust-free, to avoid serious working
environments such as metal polishing and grinding;
Fully automatic three-layer flat mask production line (outer ear)Equipment overview:This production line consists of a mask body machine and two ear band machines. Compared with the traditional single mask machine, it integrates automatic conveyor, this design can significantly improve production efficiency and reduce the number of operating labor, the entire line can be operated by only one person.This machine can produce various non-woven masks, flat medical masks, disposable masks, etc. The entire process is automated from feeding, nose line insertion, edge sealing, ear band heat sealing, cutting, stacking output counting of finished products, etc., and is fully PLC and HIM controlled.